ABL TILE & BATHROOM CENTRE - YOUR ONE STOP SHOP

Browse Products

Canterbury Classic Freestanding Gas Heater for Natural Gas

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
$4,399.00
Brand:
Weight:
50.00 KGS
Shipping:
Free Shipping
Quantity:

Canterbury Classic Freestanding Gas Heater

 

An elegant, curved appearance effortlessly suits any home.

The double glazed window allows unobstructed viewing of the flames, creating the perfect feel of a flickering log fire in your home.

An impressive energy efficiency rating delivers heat effectively.

The heater can be safely placed on all floor surfaces, making it suitable for the family rooms and large living areas of modern Australian homes.

 

ype Freestanding / top flue
Colours available Black
Gas types available Natural gas

Design features Realistic eucalypt look logs
Curved double glazed glass
Enhanced flame effect
Controls Electronic ignition and controls
Fan/heat settings 3 speed / 3 heat
Heat output 5.55 kW / 19.98 MJ/h
Heats on average 80 square metres (80 m2)
Gas consumption 26 MJ/hr
Efficiency rating 4 stars
(tested to AS 4553:2008)
Safety 4 continuously monitored safety systems
Inclusions Flue kit (FLUERO-B), containing:
3 x 870mm lengths of 125mm  diameter black flue
1 x 870mm length of 125mm diameter galvanised flue
1 x painted bottom flue spigot
1 x ceiling ring
1 x 125mm cowl

 

  Freestanding overall
Height (mm) 723
Width (mm) 650
Depth (mm) Heater depth: 425

Minimum distance from rear of heater to wall is 40mm. Total minimum depth from front of heater to wall is 465mm.



Planning notes

  • Gas connection via a ½” copper compression fitting.
  • A 10 amp socket within 1.5m is required.
  • Maximum flue length is 4.5m.
  • Heater does not require non-combustible base. Can be installed against a combustible wall with clearances of 40mm rear, 100mm side and 900mm in front of heater.
  • This model is to be installed with a Round flue kit FLUERO-B, included with the heater.
  • The included flue kit FLUERO-B comprises of:
    3 x 870mm lengths of 125mm diameter painted black flue
    1 x 870mm length of 125mm diameter plain flue
    1 x ceiling ring
    1 x 125mm cowl
    1 x painted bottom flue spigot
  • When selecting a heater, consideration must be given as to the construction of the building with regards to ventilation. This will affect the efficiency of the type of flue selected and how it will operate – e.g. high energy efficient rating homes have little allowance for the introduction of fresh air for combustion purposes, therefore issues can arise with reverse flow of air through a standard flue in these homes. Two storey extensions to existing homes can also reduce the performance of standard flues. Avoid installing standard flue heaters on external perimeter walls of high pitched roof buildings to reduce the possibility of reversed air flow through the standard flue. If in doubt always select Powerflue models as these are not affected by these issues.